The iPV 400 is a temperature control mod powered by a YiHi SX330-F4 chip. The IPV 400 has a power maximum of 200W, a joule maximum of 120J, and a temperature maximum of 572F. It is compatible with S304, Ni200, titanium wire, and more. The IPV 400 by Pioneer4You only requires two 18650 batteries (not included).
The iPV 5 by PIoneer4You is an impressive device is powered by a Yihi SX330-200 Chip, enabling a power maximum of 200W. The iPV 5 also has a Joule mode with a maximum output of 120J. With a minimum resistance of 0.05 Ohm and diverse wire compatibility, this mod is perfect for those who like to build their own atomizers. Also the iPV 5 has upgradeable firmware, to keep it up-to-date and functioning at its best.
The Pioneer4You iPV D3 80W has a very lightweight compact design; it's only a little bit larger than an Eleaf iStick 30W. With 80W of power and up to 50J of output, this device has a lot of power for its size. Plus, it can handle builds with low resistances. In the temperature control mode, it can fire resistances as low as 0.05 ohm.